996 Series - Door Closers

Briton Fire Door Closers | 996 Series - Door Closers | Electro HO/Free Swing


Briton 996 series door closers are trusted fire door closers intended for commercial use. These adaptable electromagnetic hold-open door closers are designed to meet safety standards, ensuring compliance with key regulations. When fitting fire door closers in care homes, the Briton 996 series offers a well-designed soft door closer, with a free-swing option that is practical and easy to install.

Suitable for medium and heavy-duty installations, Briton door closers in this range are ideal for environments that emphasise fire and smoke protection while ensuring ease of use. Choosing a Briton 996 series door closer guarantees durability and peace of mind, backed by a 10-year warranty (Mechanical). If you require a dependable door closer for fire doors, the 996 series from Briton is an excellent option.

Briton 996 Series Door Closers - Data Sheet

Door Closer Adjustment - How to adjust a door closer (Click the Link for Briton Door Closer Adjustment)

16  Products

  • Frequently Asked Questions | FAQs

    BRITON 996 SERIES DOOR CLOSERS

    Frequently Asked Questions

    I'm unable to adjust the latch action on my Briton 996 electromagnetic hold-open door closer. What's causing this?
    		This indicates that the arm has not been pre-tensioned during installation. Refer to the instruction sheets available on our website: Catalogues & Data Sheets.
    What is the minimum strength required for a closer on a fire door, and does the Briton 996 series meet this requirement?
    		Yes. All door closers fitted on fire-rated doors must deliver at least power size 3, meaning a closing torque of 18Nm at a point between 0° and 4°
    What voltage does the Briton 996 electromagnetic door closer use?
    		24 Volts DC – plus, or minus 10% Anything over 26 Volts DC may cause damage to the solenoid.
    What is the power requirement for a Briton 996 closer?90mA (.09 of an amp)
    What is the maximum cable run for a Briton 996 series electromagnetic door closer?
    		A qualified electrician should calculate this, which depends on factors such as wire gauge and ambient temperatures. We can offer general advice, but the installers must perform the final calculation.
    My Briton 996 door closer is hitting the door frame when opened past 90 degrees. Can I move it 25mm away from the hinge side to miss the door frame?
    		No, it has been tested and approved in the position specified in the fixing instruction. Consider using a push side-mounted 9963/66 instead.
    Do you offer an electromagnetic door closer or holder that can operate on AC alternating current?
    		All Briton electromagnetic hold-open door closers operate on 24-Volts DC. The Briton 503 door holder can operate on 230 Volts AC.
    Are spare magnets accessible for the Briton 996 closer?Yes. The product code is Briton 996/863/UF.
    I have an old Briton 998 electromagnetic closer that I’d like to replace. What can you offer?Use the Briton 996 unit, either the pull-side (996/01) or push-side (996/66) version. Available in three power sizes, for example, size three suits any door up to 950mm wide and weighing up to 60kg.
    Are Briton 996 door closers rated for steel fire doors?No, the Briton 996 series is rated only for timber and composite doors.
    I have an old Briton 997 electromagnetic door holder. What's the nearest replacement?
    		Briton 9963/01.SES | Electro HO/Free Swing Door Closer (996)
    Can I convert a 9963/01 pull-side unit to a 9963/66 push-side unit by replacing the arm?
    		No. They're built differently. You could mount the 01 unit push side transom-mounted application 61 instead.
    My Briton flexible door loop is too short. Can it be extended?
    		Door Hardware Online can provide extended door loops to suit your specific requirements. For more information, please contact the sales office.
    What is the maximum hold-open angle available from the Briton 996 series?
    		The adjustable hold-open angle ranges from approximately 85° to 95°, and from 103° to 110° when fitted on the standard pull side of the door. It is from 85° to 95° when fitted to the transom, and from 65° to 85° and 90° to 105° when fitted on the push side of the door.
    What are the minimum clear-opening sizes required for each Briton 996 door closer mounting application?Application 01 (door-mounted pull side) requires a minimum clear opening of 370mm. Application 61 (transom-mounted push side) requires a minimum clear opening of 540mm. Application 66 (door-mounted push side) requires a minimum clear opening of 500mm.