FM10076.US32D Hinge 100mm x 76mm x 3.3mm
Full Mortice Hinge 100mm x 76mm x 3.3mm. Satin Stainless Steel
- CE-EC Certificate of Conformity - 1121 - CPD - AC0018
- Manufacturing Facility ISO 9001 & ISO 14001 Certified
- Limited Warranty - for the life of the building
- Grade 304 Stainless Steel
- Supplied Screws: Pozidriv wood screws - No.12 x 32mm (8 per hinge)
- Box Quantity: 3 off singles per box (48 off singles per case) - Sold as Single Hinges
- BS EN 1935:2002, Hinge Grade - 13
- Number of Test Cycles - 200,000
- Test Mass of Hinged Element - 120 kilos
- Unadjusted Door Weight <45 kilos
- Adjusted Door Weight <80 kilos*
- Supplied Screws: Pozidriv wood screws - No.12 x 32mm (8 per hinge)
- Box Quantity: 3 off singles per box (48 off singles per case) - Sold as Single Hinges
* See Hinges & Pivots Specification Guide
Important Note - The test mass element of 120 kilos must not be interpreted as the maximum recommended capacity of all hinges passing this test successfully. Similarly, the number of test cycles should not be interpreted as the maximum number of available cycles for doors incorporating this hinge. Under certain circumstances doors may exceed this figure significantly.
The FM Series - Ball bearing hinge has become the industry standard in many commercial and institutional applications. The ball race comprises hardened chrome alloy bearings and a (type 1008) steel sustainer for vertical support. A plated steel or stainless steel non-rising pin is included for lateral support.
The FM10076 Series is a Relcross product - see www.relcross.co.uk for additional information