2721BD.T.S.SES Cam Action Door Closer
Cam Action Closer w. Backcheck and Delay Action, Softline Cover* - Adjustable Power Size 2 - 5. Push Side of Door or Pull Side Transom. Silver w. Matching Arm & Track
See 2721.DVP.SE Angle Bracket - A necessary add-on for track installation to the underside of reveals
Briton Cam Action Closers are also available in a choice of electroplated metallic finishes - all with matching arm & track - POA
* Alternative Slimline Cover available in SES and a choice of electroplated metallic finishes - all with matching arm & track - POA
Briton Cam Action 2700 Series is a precision manufactured cam-action, slide channel door closer, in a compact, overhead, surface fixed unit. Providing exceptional ease of use by reducing the resistance encountered when opening the door, the Briton 2700 Series bridges the gap between the requirements for fire and smoke control and ease of operation required for accessibility.
Briton Cam Action Closers - Why are opening and closing forces important?
For disabled people to have independent access through single or double swing doors, the opening force, when measured at the leading edge of the door must not exceed 30N between 0º and 30º from closed and 22.5N thence until 60º. These figures (post March 2005) are deemed to be manageable. Where fire (compartmentation) doors are concerned the closing force exerted becomes the overriding factor. BS EN 1154:1997 states that the closing moment for a power size 3 door closer must be a minimum of 18Nm at a point between 0º and 4º - In other words, achievable at any one point only and not throughout the angle. BS EN 1154:1997 Annexe A states that controlled door closing devices with a power size of less than 3 (see Table 1 of that standard for a full definition) are not considered suitable for use on fire door assemblies since they will be unlikely to provide the necessary torque.